TPU Rubber-like

What bends does not break.

Looking for a material with rubber-like properties? Our TPU 1301 is a thermoplastic polyurethane with very bendable, soft properties. It has good physical characteristics and is resistant to wear and chemicals. As a result, it is often used for gaskets, sports soles and footwear, orthopaedic models, hoses, seals and wheels.

Practical information

Delivery time

Standard: 15 workdays

Tolerances

Standard: ±0.4mm of 0.4% of Technical: ±0.15mm of 0.2%

Minimum wall thickness

1mm

Colors

Standard: naturel (unfinished)

Pay attention to

Avoid thin, long walls. The temperature of the process can cause parts to warp. Due to the process, tolerances in building orientation (Z) are higher and holes are slightly elongated. Also check our guidelines.

Datasheet

Condition Value Unit
Tensile strength ISO 527 7 ± 3 N/mm2
Elongation at break ISO 527 250 ± 5 %
Flexural modulus ISO 178 60 ± 5 N/mm2
Shore A hardness 86 A

Do you have any burning questions?

It may be true that 3D printing hasn’t been used as long for production as turning, milling or injection molding. As an engineer, maybe you don’t really have that ‘feel’ with printed parts yet. And you are not confident about how 3D printed products hold up in your machines. We fully understand that! And we will help ease your mind.

So: do you have a 3D printed application in mind? Use a 3D printed part and taste the pudding? See if it will hold up? Then contact Neil for a free sample. On the house!

Do you want to get a quote
to have your 3D print produced?